 |
WSPM0003 | |
 |
|
 |
460 Watts Output Power |
|
N+1 Redundant Configuration
|
|
5 Year Warranty |
For: WSPR0017, WSPR0019 |
|
 |
|
 |
|
|
Universal Power Input |
|
Hot Swappable Design |
|
N+1 Technology |
|
Industrial Grade Components |
|
Active Power Factor Correction |
|
Fault Alarm Signal |
|
Power Status LED Indicator |
|
Remote DC Sense on +5V & +3.3V |
|
Short Circuit Protection |
|
Over / Under Current Protection |
|
Over / Under Voltage Protection |
|
Over / Under Power Protection |
|
MTBF > 100,000 Hours |
|
Industrial Leading 5 Years Warranty |
 |
|
|
|
|
Input Range : 100 to 240 VAC |
|
Power Factor : 0.98 Minimum |
|
Efficiency : 65% Minimum @ Full Load |
|
Hold up Time : 20 ms Minimum @ Full Load |
|
PSON (Remote ON/OFF): TTL compatible signal |
|
Power Good: 200 to 500 ms, TTL compatible signal |
|
Operating Temperature: 0 °C to 40°C |
|
Operating Humidity: 20% to 90% |
 |
|
|
|
|
Harmonic : Meet EN61000-3-2 |
|
EMI/RFI: CE, FCC class B |
|
Safety: UL, cUL, TUV, CB |
 |
|
| Output Table, Noise & Ripple |
 |
Note 1: The +5 & +3.3 Volt total output shall not exceed 200 Watts. Note 2: Total +12V1,+12V2 and +12V3 total output shall not exceed 35A. Note 3: Peak +12V DC output power should not exceed 38A peak for a minimum of 12 seconds. Note 4: The +5, +3.3 & +12Volt total output shall not exceed 440 Watts. Note 5: Maximum continues total DC output power shout not exceed 460 Watts. |